This series
of antennas have been designed from the ground up for long-term high-performance
applications. The casing is UV stabilized and if securely fixed using just
a single locking bolt.
This
design provides a watertight seal, excellent performance and rugged physical
characteristics for demanding long term applications.
These
antennae have found popular use in many outdoor and mobile applications
including for transport industry - the domed design has proven to be able
to meet customers 5-10 year lifetime requirements.
The
standard Radome antennae above are complemented by Duem's ability to custom
design these antennae. Radome sizes vary from the small size CGS antenna
shown, to much larger dome's able to cater for GSM/GPS/WLAN/TETRA/Bluetooth
/ and just about any other required antenna specification within the ONE
radome design.
Specifications
Frequency
380
- 400 MHz
Impedance
50
Ohms
Bandwidth
10MHz
380 - 390 Mobile Tx optimized / 20 MHz 380 - 400 MHz Mobile Rx
VSWR
1.5:1
380 - 390 MHz / 2.0:1 380 - 400 MHz
Polarization
Vertical
Gain
-4dBi
Typically (low sensitivity typically - 10 dBi)
Elevation
Coverage
0
- 90°
Azimuth
Coverage
260°
Mount
Single
Nylon Hollow Stud Dia16mm
Cable
1
x 300 mm RG174
Connector
FME
(f) + FME (m) colour coded
Dimensions
111
mm dia x 35 mm
Frequency
150
to 210 MHz (exact frequency to order)
Impedance
50
Ohms
Bandwidth
8
- 12 MHz dependent on the center frequency (no on-site tuning required)
VSWR
<2.0:1
mobile TX
Polarization
Vertical
Gain
-3dBi
Typically
Elevation
Coverage
0
- 90°
Azimuth
Coverage
360°
Mount
Dual
nylon hollow stud 16mm diameter
Cable
1
x 3 .05M rg58, Others by request
Connector
Not
terminated as standard, connectors by request
Dimensions
346
x 80 x 76
Description
346mm
groundplane independent single / dual stud (no GPS), black or white