gsm modules and accessories
Home Page  About Us Contacts Site Map News
 


Supercapacitors

Cap-XX
SuperCapacitors are able to hold an incredible amount of charge due to their huge capacitance ratings - commonly used are 0.2F and above. The very low ESR ensures that these devices are able to deliver the huge 2A pulses required for GSM / GPRS Operation. Class 10 modules double this requirement and it becomes critical to ensure that the power supply is rock steady - too much of a voltage drop will cause phase and frequency errors in the RF sections of the GSM/GPRS module.



Cap-xx_Supercapacitor
 
Cap-XX_supercapacitor_side_View

Supercapacitors are also essential in extending low temperature performance - battery ESR increases dramatically at low temperatures, restricting the current a battery can deliver. A supercapacitor can be used in this situation to assist a battery to provide the low temperature extension and to remove the "strain" on the battery, thus achieving a longer battery life and low temperature operation. Supercapacitors are produced from safe and environmentally friendly materials, thus do not encroach on new EU directives.

Cap-XX_GW1_Datasheet
GW1 Series
Cap-XX_GW2_Datasheet
GW2 Series
Cap-XX_GS1_Datasheet
GS1 Series
Cap-XX_GS2_Datasheet
GS2 Series


Rubycon Supercapacitors

Rubycon have produce a range of capacitors with capacitances to 100 Farads. These new double layer capacitors have been designed to meet the growing need for energy conservation, storage and reduced wastage. These supercapacitors can be used to slowly accumulate vast amounts of energy and store it for when it is required, taking the strain off the battery and in many cases improving battery performance as a result.

 
Rubycon_Supercapacitors
Rubycon_Supercapacitor_Datasheet
Rubycon Supercapacitors
  Copyright © 2008 Acte UK 2.2 Intec Business Park, Wade Road, Basingstoke, Hampshire RG24 8NE
Tel +44 (0) 1256 845888 Fax +44 (0) 1256 333031 www.actecomponents.co.uk
Lagercrantz